HONGYANG GROUP Bulgaria Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Bulgaria Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GB6Q FUEL DISPENSER

D-GB6Q

D-GB6Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy :±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type :LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose :4.5m

Weight : 385kg

Dimension(L×W×H) : 1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 28 20ft: 13

products links

links

technical archives

    This device often is installed on check valve, hose pipeline also release certain hydraulic pressure. Pipe Resonance Apart from hydraulic stock, other hydraulic components also cause a certain degree of noise in pipeline, such as vane pump, overflow valve, vapor separator, measurement transducer, solenoid valve and nozzle. Sometime pipe resonance will be generated if the inherent fre fuel dispenser quency of pipe equivalent to hydraulic pulse resulted from hydraulic components of fuel dispenser. At that time, the normal working state will be affected, which is harmful to staff’s health due to intensive noise. In order to explain th fuel dispenser is problem, the inherent frequency of pipe is introduced here. Pipe inherent frequency is: ω0 = kÏ€/2 l2 ·EJgGd+Gj (2-14) In the above formula: ω0 ── inherent frequency of pipe l ── supporting point distance E ── elastic modulus of pipe material J ── inertial moment of pipe section g── acceleration of gravity Gd── weight of pipe per meter Gj──liquid weight in per meter of pipe K── modifying coefficient K= 1-pA+mv/2Ï€2EJA/l2 (2-15) In above formula: A ──pipe section m ──liquid weight in per meter of pipe v ─┠fuel dispenser €velocity of flow of liquid in pipe Several relative parameters affect the inherent frequency of pipe in Formula 2-14. Therefore, most manufacturers pay much attention to these elements that affect pipe inherent frequency and pulse frequency of hydraulic components in the design and manufacture of fuel dispenser, making the two frequencies as much different as possible so as to appear pipe resonance in fuel dispenser. 3. Hose used for fuel dispenser There are two kinds of hose used in fuel dispenser. one is made according to GB/T10543 Rubber Hose Used for Refueling and Discharge of Airplane, connected oil indicator with nozzle; the other kind of hose is used in fuel dispenser with vapor recovery device, not only connecting oil indicator with nozzle,

technical specification

    Multi_Nozzle_State   44 Bin8 R (1-9) O   (2CH) These bits correspond to the physical nozzle state   0 = Nozzle not removed   1 = Nozzle removed   Note this Data Id will reflect the physical state of any   nozzle not just the types l fuel dispenser isted in Data_Id 43.   Any changes in the Multi_Nozzle State must result in   unsolicited FP Multi Nozzle_Status_Message (Data_Id   101)   45 fuel dispenser Bin8 R (6-9) O   Multi_Nozzle_Status_Message   (2DH)   These bits correspond to the nozzle definitions in Data_Id W (6-9)   44.   0 = Flow disabled through respective nozzle   1 = Flow enabled through respective nozzle   Where the dispenser does not allow a flow from the   requested nozzle to be controlled the write is rejected   with a Data_ACK = 2 (Not Writable).   The default value is despenser specific. Some despensers   may require f fuel dispenser low to be enabled through all available   nozzles by default others may restrict flow to specific   nozzles by default.  FP31_2.22 IFSF - STANDARD FORECOURT PROTOCOL October 2005   DISPENSER APPLICATION   Page: 106   FUELLING POINT DATABASE   DB_Ad = FP_ID (21H-24H)   Data Field Type ReadWrite MO   Data Element Name   Description   _Id

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    nce was already strained by what it says is continued Pakistan-inspired terrorism in Kashmir itself as well as a co-ordinated bombing in Delhi last October, in which more than 60 people died, and a gun attack in a science institute in Bangalore in December. The general himself had been incensed by India s expression of concern about the “spiralling violence�in Baluchistan, and in turn fuel dispenser accused India of financing and training insurgents, which India denies. This exchange of accusations recalled the bad old days before the peace process was launched in 2003. But the talks in Delhi made some progress, with discussio fuel dispenser n of more confidence-building measures, such as the opening of new crossing-points on the line of control, and an Indian proposal to halt building of new army posts along it. A bus that sporadically links the capitals of the two parts of Kashmir remains the most visible sign of progress. None of this, however, is likely to mollify Pakistani critics of the peace process, who suspect that India has no real interest in a Kashmir settlement, sees the peace process as an effective means of avoiding one, and strings the general along. Nor can India point to much progress in efforts to repair relations between Delhi fuel dispenser and Indian-held Kashmir. Mr Singh met the main separatist group, the All-Party Hurriyat Conference, last September, but there has been no follow-up. On January 14th he met Sajjad Lone, a Kashmiri separatist leader who has fallen out with the Hurriyat. This was portrayed as part of an effort to engage all sides of Kashmiri opinion. That is a worthy aim. But it is taking a very long time, and many Kashmiris, as well as Pakistanis, are in a hurry. © 2006 . Afghanistan Where s the justice? Jan 19th 2006 | KABUL From The Economist print edition How to bring war criminals to book Reuters ASSADULLAH SARWARY, who is accused of mass